How do I reset my canon mx492 printer?

[angrymouse428]

Solution

1. Press the Setup button.
2. Press the right arrow until Device settings appears. Then,press OK.
3. Press the right arrow until Reset setting appears. Then,press OK.
4. Press the right arrow until LAN settings appears. Then, pressOK.
5. Press the left arrow to select Yes. Then, press OK.

[greenmouse228]

Hold the Stop/Reset button while pushingthe power button. While still holding down the powerbutton, release the Stop/Reset button and then pushit twice in a row. Wait approximately 20 to 30 seconds untilthe LED shows 0. Push the Stop/Reset buttonfour times in a row.

Subsequently, question is, how do I reset my Canon mg3650 printer? How to change the ink cartridges in a CanonMG3650.

1. Switch the printer on.
2. Open the printer cover, the cartridges will move to side.
3. Push down on the clip to release the empty cartridge.
4. Remove the packaging from the new cartridges.
5. Slide the new cartridge in, and lift the clip.
6. Close the printer cover.

Beside this, how do I reset my Canon Pixma mg3500 printer?

How to Restore the Machines Network Settings to FactoryDefault

1. Press and hold the Stop button until the Alarm lamp flashes 17times.
2. Release the Stop button. The network settings areinitialized.

Why is my Canon printer not responding?

In most cases, the major culprit behind printer notresponding error is lack of communication between your PC andprinter. If that is the issue, then below are a few stepsthat might help you to resolve the issue. Press on the Setup buttonon your wireless Canon printer, go to Wireless LAN setup,and click on OK.