2in x 2in - check travel.state.gov for all the specifications though
What size notched trowel for 3x12 tile?
-
What Size Trowel to Use for Tile
3/16″ to 1/4″ V-**notch** = Mosaics **tiles** up to 4-1/2″ glazed wall **tile** 1/4″ x 1/4″ U or Square **notch** = 4″ to 8″ **tile** 1/4″ x 3/8″ U or Square **notch** = 8″ to 16″ **tiles** 1/2″ x 1/2″ U or Square **notch** = 16″ and larger
-
For Versabond thinset, the recommended trowel size for a tile where the longest side of tile is less than 8 use 1/4 x 1/4 x 1/4 (6 x 6 x 6 mm) Square-Notch. The recommended type of trowel is usually listed on the adhesive package.
One may also ask, what size notched trowel for 20x20 tile? I use a 3/8 trowel for 12 tiles and move up to a 1/2 trowel around 16, depending on the flatness of the floor and tile. Ill also use my 3/4 U-notch for tile up around 20 or when the floors are very bad.
Also Know, what size notched trowel for 6x24 tile?
Typically for floor installations, a 1/4” square-notched trowel is the right tool for the job, but if your floor is rolling, uneven, or if you are working with very large tiles, it helps to use a trowel with larger notches. Recommended sizes are 3/8” and 1/2”, which are easy to find in most hardware stores.
What size notched trowel for floor tiles?
So a 12mm x 12mm trowel will leave a 6mm high bed of adhesive beneath the tile. A 6mm x 6mm trowel will leave a 3mm bed of adhesive beneath the tile. Using a U-notched trowel and embedding the tile into the adhesive leaves you with a bed of adhesive beneath the tile a little over 1/3 the size of the trowel teeth.
What is discussplaces?
This page shows discussions around "What size notched trowel for 3x12 tile?"