AnswerAccording to the INTERPOL data, for murder, the rate in 2000 was 6.86 per 100,000 population for Pakistan, 1.10 for Japan, and 5.51 for USA. For rape, the rate in 2000 was 1.69 for Pakistan, compared with 1.78 for Japan and 32.05 for USA. For robbery, the rate in 2000 was 6.49 for Pakistan, 4.08 for Japan, and 144.92 for USA. For aggravated assault, the rate in 2000 was 4.1 for Pakistan, 23.78 for Japan, and 323.62 for USA. For burglary, the rate in 2000 was 11.1 for Pakistan, 233.60 for Japan, and 728.42 for USA. The rate of larceny for 2000 was 15.53 for Pakistan, 1401.26 for Japan, and 2475.27 for USA. The rate for motor vehicle theft in 2000 was 2.3 for Pakistan, compared with 44.28 for Japan and 414.17 for USA. The rate for all index offenses combined was 48.07 for Pakistan, compared with 1709.88 for Japan and 4123.97 for USA.Answer:I find that Interpol and the United Nations Office on Drugs and Crime keep crime statistics by type of crime. A comparison of overall crime rates between Pakistan and the US isnt really possible due to the fact that acts considered a crime in one country may not be considered a crime in the other. Reporting of crimes, investigation of crimes, and processing crimes through each justice system is also not comparable. Any numbers reported may have been compiled from far different sources or based on different criteria. Only generalities can be compared between these two countries.
What is SFM in drilling?
-
Drilling Speeds and Feeds. The speed of a drill is measured in terms of the rate at which the outside or periphery of the tool moves in relation to the work being drilled. The common unit and term for this velocity is surface feet per minute, abbreviated sfm.
-
Surface feet per minute. SFM is a combination of diameter and the velocity (RPM) of the material measured in feet-per-minute as the spindle of a milling machine or lathe. 1 SFM equals 0.00508 m/s (meter per second, the SI unit of speed).
Subsequently, question is, what is a good RPM for a drill? Recommended Speeds for Carbide Tipped Holecutters
Size Steel Stainless Steel 11/16 to 13/16 in. 700 - 1000 RPM 300 - 700 RPM 7/8 to 1-3/16 in. 500 - 800 RPM 200 - 450 RPM 1-1/4 to 1-9/16 in. 300 - 600 RPM 175 - 315 RPM 1-5/8 to 2 in. 200 - 500 RPM 120 - 225 RPM
Subsequently, one may also ask, what is SFM cutting speed?Cutting speed is the speed in linear feet per minute or Surface Feet per Minute (SFM) that a given tooth (flute) on the cutter will be moving when it cuts through the material. All materials have a documented SFM or cutting speed. Think of it like a minimum and maximum speed limit on a highway.
What is the full form of SFM?
SFM Scanning Force Microscopy Academic and Science » Electronics Rate it: SFM Surface Feet per Minute Miscellaneous » Unit Measures Rate it: SFM Simple File Manager Computing » General Computing Rate it: SFM Stewart Finlay Mclennan Community » Famous and Celebs Rate it: SFM Standard Format Markup Computing » General Computing Rate it:
What is discussplaces?
This page shows discussions around "What is SFM in drilling?"
