After replacing a power steering pump or pressure hose, its always a good plan to flush and bleed the power steering system of air. For most power steering-equipped vehicles, this is a simple process. Turning the steering wheel lock to lock several times will remove any unwanted air in there.
Also, how do you bleed power steering with Hydroboost? HYDRO-BOOST SYSTEM BLEEDING
Jack up the front of the car, turn the wheels all the way to the left, and crank the engine for a few seconds.
Check steering pump fluid level.
Lower the car, connect the battery lead, and start the engine.
The Hydro-Boost system should now be fully bled.
Subsequently, question is, how do you bleed air out of power steering system?
How to Remove Air From Power Steering
Make sure the engine is off and cool.
Remove the power steering reservoir cap and check the power steering fluid level.
Add as much fluid as needed to fill it up.
Replace the cap.
Locate the power steering bleed valve on the steering box.
Push a hose on the end of the bleeding valve.
How much does it cost to bleed power steering?
Depending on the year, make and model, the power steering fluid can cost as little as /qt to as much as for European vehicles. If you have the service done at an independent shop or oil change place, plan on around to **** for power steering fluid flush cost.