As an expat be prepared to hear “this is normal in Georgia” every time something goes wrong. No one is in a hurry to fix anything - from broken lift in the building (I even got stuck once on a Sunday night and was told “maybe someone will come tomorrow to free you”! - had to break out myself) to your wifi (stopped working for almost 2 weeks, not until we threatened to change companies that they decided to send a technician). We didn’t find it very friendly. People don’t smile, staff in stores are surly and unhelpful. The taxi drivers are the worst in the world (including Uber). Utter maniacs. The cost of living has risen steeply because of inflation. People also constantly thought we were Russian and we got yelled at several times by locals who don’t want Russians around (for obvious reasons). Overall, it’s not the most pleasant place to be an expat. However, the food is delicious (if heavy), the scenery is gorgeous. The mobile data is cheap, but groceries ans eating out is more expensive than we expected. I’d recommend it for a month or two, but no more.
How do I know if my vacuum check valve is bad?
-
Symptoms of a Bad or Failing Vacuum Brake Booster Check Valve
- Brake pedal is difficult to engage. When the vacuum brake booster check valve is working correctly, applying pressure to the brake pedal is easy and very smooth.
- Brakes feel spongy.
- Brakes stop working.
-
- Firm Brake Pedal This is what happens when the check valve is working just fine. But if the check valve is worn out and no longer working, then it might cause your brake pedal to become more difficult to push down. The pedal will suddenly feel firm and itll take a lot more foot pressure than normal to push it down.
Also, what does a vacuum check valve do? A vacuum check valve will only allow air to move in one direction. There is a check valve on the brake booster line coming off of the intake manifold that does not allow the vacuum that the booster needs to bleed off when under a WOT condition (no vacuum). It may be used for different things elsewhere.
Consequently, how do you test a vacuum check valve?
Vacuum Inlet Check Valve Test: To test the vacuum check valve, disconnect the vacuum supply hose from the intake manifold or vacuum pump, and blow into the hose. If air passes through the valve into the booster, the check valve is defective and should be replaced.
How do you change a vacuum booster on a check valve?
Part 1 of 1: Replacing the vacuum brake booster check valve
- Materials Needed.
- Step 1: Open the hood.
- Step 2: Locate the brake booster check valve.
- Step 3: Remove a gear type clamp.
- Step 4: Remove a spring type clamp.
- Step 5: Remove the brake booster vacuum hose.
- Step 6: Remove the vacuum brake booster check valve.
What is discussplaces?

This page shows discussions around "How do I know if my vacuum check valve is bad?"