How do I calibrate my One Touch Ultra Mini meter?

[sadtiger438]

? Turn the meter on Press and hold ? for five seconds until the start-up test screen appears. After the test screen, the pre-set time and date will appear on the display for five seconds. The hour will now start flashing. NOTE:If a setting does not need to be updated, simply wait five seconds.

[goldenfrog555]

Put the UltraMini into Settings Mode: Press and hold the power button on the meter (the ? button on the front of the meter) for at least 10 seconds. If you have held the button long enough, you should see the time and date appear on the top right hand of the screen.

Also Know, is One Touch Ultra Mini accurate? The OneTouch UltraMini is part of the Blood Glucose Meter test program at Consumer Reports. Accuracy: This is based on the average of differences between data from a particular blood glucose meter and parallel readings from a standard laboratory instrument.

Similarly, you may ask, what does it mean when my One Touch Ultra Mini says hi?

Your healthcare professional can work with you to determine what actions, if any, you should take if your results are higher than 180 mg/dL. If your meter displays HI, you may have a very high blood glucose level (severe hyperglycemia) exceeding 600 mg/dL. Re-check your glucose level.

How often should blood glucose meters be calibrated?

You should calibrate when the system requires it or if the CGM reading is inaccurate. You can calibrate when you are asked for the two start-up blood sugars, when prompted by the 12-hour calibration prompt, and whenever the sensor is inaccurate.